920-133 Exam

Quality and Value for the 920-133 Exam

just4study Practice Exams for Nortel 920-133 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your 920-133 Exam

If you prepare for the exam using our just4study testing engine, we guarantee your success in the first attempt. If you do not pass the NCSS 920-133 exam (NNCSS Baystack Switching) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

Nortel 920-133 Exams (in EXE format)

Our Exam 920-133 Preparation Material provides you everything you will need to take your 920-133 Exam. The 920-133 Exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.

920-133 Downloadable, Interactive Testing engines

We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our Exam Preparation Material provides you everything you will need to take a certification examination. Like actual certification exams, our Practice Tests are in multiple-choice (MCQs) Our Nortel 920-133 Exam will provide you with exam questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the 920-133 Exam:100% Guarantee to Pass Your NCSS exam and get your NCSS Certification.
　
　
Exam : Nortel 920-133
Title : NNCSS Baystack Switching


1. A BayStack 450-24T switch will be added to an existing stack of two BayStack 470-24T switches. The software Release running on the BayStack 450-24T switch is compatible with the software Release running on the BayStack 470-24T switches. To complete the stack creation successfully, which two configuration changes are necessary? (Choose two.)
A. Set the Unit Select switch on the BayStack 450-24T to the "Off" position.
B. Set the Unit Select switch on the BayStack 450-24T to "Base" ("On" position).
C. Set the Stack Mode for all BayStack 470-24T switches to Hybrid and then reset the stack.
D. Cable the BayStack 450-24T switch into the stack, power off all units, and then power up the stack.
E. Set the Stack Mode for the Base BayStack 470-24T switch to Hybrid and leave the other BayStack 470-24T switch as Pure.
Answer: AC

2. Given the following information:
A BayStack 460-24T-PWR switch is being installed.
The switch will be fully populated with all devices requiring Power over Ethernet (PoE).
The switch has been connected to both internal and external power sources.
The switch will be configured through web-based management.
Once you access the BayStack 460 via the BS460_24T_PWR(config)#poe poe-dc-source command, which configuration will provide the most power to supply PoE to the connected devices?
A. nes - Set DC power source from NES
B. rpsu - Set DC power source from the rpsu
C. baystack10 - Set DC power source from BayStack 10
D. unit - Set power pairs of another unit in a stack
Answer: A

3. Click the exhibit button.
Given the following BayStack 325-24T switch configuration:
VLAN 10 is a port-based VLAN.
Port 1 is an untagged member of VLAN 10.
Port 5 is a tagged member of VLAN 10.
The device on Port 1 transmits an untagged frame to the device on Port 5. How will an untagged frame be treated when it reaches Port 5 on this switch?
A. It will be discarded when it is received.
B. It will be placed in a hardware-based queue based on Priority 6, it will be tagged, and transmitted out Port 5 with Priority 2.
C. It will be placed in a hardware-based queue based on Priority 6, it will be tagged, and transmitted out Port 5 with Priority 6.
D. It will be placed in a hardware-based queue based on Priority 2, it will be tagged, and transmitted out Port 5 with Priority 2.
Answer: C

4. You are configuring a BayStack 470-48T switch for QoS and it is necessary to implement a meter as follows:
Limit bandwidth utilization to 20 Mbps.
Drop all traffic that exceeds the 20 Mbps threshold.
How do you ensure that traffic that exceeds the 20 Mbps threshold is dropped?
A. When adding the meter to the policy, set Out-of-Profile Action to Drop_Traffic .
B. When defining the Committed Burst Size of the meter, set Maximum Burst Size to 0 kbps .
C. When adding the meter to the interface group, set Threshold-Exceeded-Traffic to Drop .
D. When defining the Committed Burst Size of the meter, set Maximum Burst Size to 0 kbps and Duration to 0 seconds .
Answer: A

5. What is required to apply traffic shaping to an uplink connection from a BayStack 470-48T switch to the Passport 8600 using the Web-based Management System Interface?
A. a Media Dependent Adapter (MDA)
B. NO additional equipment is required
C. a Gigabit Interface Connector (GBIC)
D. a mini Gigabit Interface Connector (GBIC)
Answer: C

http://www.Just4study.com The safer.easier way to get NCSS Certification.